Tag Archives: peltier
Water cooling twin peltiers
To get the best cold side performance out of a peltier to use for cooling, you need to remove the most amount of heat that you can from the hot side. Your best chance is via water cooling, but you will need a bigger water block. This is how to build one. Continue reading
Heat sink and peltier module pt 4
To make your peltier cooled/heated cabinet run, you are going to need to connect it all up electronically. This is a tutorial to show you how this can be done. Continue reading
Heat sink and peltier module pt 3
Part 3 of the previous heat sink post. To recap….. We have built the aluminium bar into a heat sink with peltiers and heat sinks and fans, now it is time to fit it to our fermentation cabinet. Below you … Continue reading
Heat sink and peltier module pt2
Part 2 of the previous heat sink post. This time we are taking the aluminium bar from the last step and adding a plastic right angle extrusion to it, that will serve as a bracket to hold the bar onto … Continue reading
Heat sink and Peltier module pt 1
This is the first post in a series that is gong to be a step by step guide to building your own temperature controlled fermentation cabinet. At this stage we are not going to go into detail of the actual … Continue reading
